Home / all / Inflatable Duct Sealing System / FTTH Fittings /

Inflatable Conduit Seal

Inflatable Conduit Seal

Inflatable Conduit Seal
Inflatable Conduit SealInflatable Conduit SealInflatable Conduit SealInflatable Conduit SealInflatable Conduit Seal
CategoriesFTTH Fittings
BrandSUNSHINE
ModelIDSS-200
Materialthe flexible metal composite material
FOB portNINGBO ,SHANGHAI
Terms of PaymentL/C, T/T
Update Time2022/8/16
Detail Information

Inflatable Cable pipeline Seals systems

The culvert without the application of sealing construction will bring the humidity and stagnant water to substation basement, culvert and 


manual well. In such environment, the corrosions and damages to culvert tray and electrical equipment are unavoidable. The common 


method is the use of inflatable type culvert sealing product, to stop the water into underground culverts nearby these facilities in a simple 


and effective way.

Inflatable type culvert sealing system, which have been widely used in the design of underground culvert constructions in the industries of 


electric system, telecommunications, port, urban construction, rail transportation and so on. Provide a clean and dry operating environment 


to cables and other electrical equipment after installation, improve the degree of protection, and reduce the works of cleaning up sludge and 


stagnant water in the manual well before the maintenance works.

Application

1.For power cables.


2.For two or more cables,sealing clips are required.


3.Inflation tool is available to provide.


4.Casters of compressed air or CO2 are COMPATIBLE, or water.


5.Each seal covers a large range of cable and duct diameters.


6.IDSS seals can be installed when water is still flowing out of the duct_saving valuable installation time.


7.Use not only for new cable installations but also for existing applications.


8.IDSS seals can be quickly and easily removed from a duct or pipe by deflation.                          

Advantage

1.Simple and fast sealing


ITCS culvert sealing system is made to a sealed airbag with the flexible metal composite material, with good pressure resistance, resistance 


to corrosion and fire-retardant, good expansion filling effect. Both sides fitted with sealing tape, applying the movable inflation hose and 


automatic silicone valve. Products simply wrapped around the cable, into the pipeline. Then, connect the inflation tool and inflated, the joint


of pipe wall and cable is filled tightly by products inflated expansion. The entire installation process only needs to monitor the inflation 


pressure, one work can complete the installation within 2-3 minutes. Even in a crowded complex environment can be simple and quickly 


operated. There is no any mess mixing and filling process. The pipe sealing product of each specification may cover a wide range of cable 


and pipe diameters.

 

2.Dismantlement with no damage


This pipe sealing systems are more likely to be removed from the pipe than other piping sealing systems. To ensure that pipes will not be 


damaged at the time of the cable's upgrade or replacement.

 

3.Strong environmental adaptability


Products can adapt to a wide range of ambient temperature changes, at the state of -15 ºC -60 ºC the airbag and the sealing material is not


aging. Products can long withstand the acid and alkali corrosion in the groundwater, rain and salt fog.. Compared with other sealing methods 


which need the construction of dry pipe, ITCS pipe sealing system can be installed into the pipe where the water still flows, and can withstand


a large water pressure.

 

4.Blank sealing and plural-culvert


According to different pipe diameters, ITCS pipe sealing system can seal the pipes with blank conduct and containing three or more cables. 


The waterproofing clip which can be inserted between cables is one of the technical methods.

Desired flexible sealing technology

The innovative technology of looping cable sealing is not only applicable to pipe sealing installation for new cable, but also applicable to


sealing upgrade or replacement for the existing culvert. The flexible sealing technology ensures that products can withstand cables' axial

 

tension and low-frequency vibration in a small range after installation. Form a buffer area between the pipe opening and cables, to avoid 


the cable shield wear which may appear movement between the cable tray. Arc-shaped surface formed by products' expansion has a 


certain flexibility, not susceptible to the chewing and wrecked by small animals. 

Product Type

TYPE

DUCT OD(mm)

Suit 1 to 4 pcs cable

Product size (mm)

cable OD (mm)

IDSS-60

60

120*240

45-7.5

IDSS-70

70

120*290

50-7.5

IDSS-80

80

120*320

55-7.5

IDSS-90

90

120*360

60-23

IDSS-100

100

120*380

75-30

IDSS-110

110

120*420

80-30

IDSS-125

125

120*460

95-30

IDSS-160

160

140*600

120-40

IDSS-180

180

140*690

140-60

IDSS-200

200

140*760

150-80

IDSS-250

250

140*940

200-120

IDSS-300

300

140*1040

250-150

For a solution or a quick quote
*Email
*Name
Tel
*Title
*Content